Polycom MGC Manager User Manual Download Page 203

Page: 203 / 382

MGC Manager User’s Guide - VoicePlus Edition

4-59

—

In the On Going Conferences

list, right-click the conference icon

and then click

Print Reservation Data

The

Print

dialog box opens.

In the

Name Of Operator

field, enter the name of the operator who

initiated the report

In the

Report To

options, select the report destination:

—

File

- to print data to a text file

—

Printer

- to print data to the default or other printer

—

Clipboard

- to copy data to the clipboard from where it can be

pasted in other text handling applications

Click

—

File

is selected, the

Save As

dialog box opens.

Save the conference data to a text file in the desired directory.
The system assigns the conference name as the default file name.

Select the destination folder, enter the required file name, then
click

Summary of Contents for MGC Manager































































































































































































































































































































































































Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands

Polycom MGC Manager, User Manual

Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands