Polycom MGC Manager User Manual Download Page 205

Page: 205 / 382

MGC Manager User’s Guide - VoicePlus Edition

4-61

To print details of all On Going Conferences or Reservations:

Expand the

On Going Conferences

list or the

Reservations

list.

You can print details using one of the following options:

—

In the

Reservations

list, right-click the

Reservations

icon, and then

click

Print All

—

On Going Conferences

list, right-click the

On Going Conferences

icon, and then click

Print All

The

Print All

dialog box opens, listing all On Going Conferences or

Reservations currently defined or running on the MCU.

To exclude items from printing, clear the check box next to the name.

Click

The

Print

dialog box opens.

Define the printing options and save the output as described in steps 3, 4,
and 5 on page 4-59.

File

is selected as the printing destination, the data of all the conferences are

printed to the same text file.

Summary of Contents for MGC Manager































































































































































































































































































































































































Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands

Polycom MGC Manager, User Manual

Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands