Polycom MGC Manager User Manual Download Page 200

Page: 200 / 382

Chapter 4 - Operations Performed During On Going Conferences

4-56

Select a different

Starting Date

and

Starting Time,

as required. To start

the conference immediately, change the date to the current date and the
starting time to the current time.

Click

The

Conference Properties

dialog box closes.

—

If scheduled to start in the future, the Reservation remains in the

Reservations

list.

—

If scheduled to start immediately, the Reservation becomes an On
Going Conference and is moved to the

On Going Conferences

list.

Deleting Recurring Reservations

You can delete a single recurring reservation or delete all the scheduled
recurrences. Deleting a single scheduled recurrence is done using the

Reservation

right-click menu. Recurring reservations can be deleted as a

group using one of the following methods:

•

Using the Recurrent Reservation right-click menu

•

Using the Reservations right-click menu

To delete a single recurring reservation:

Right-click one of the Recurrent Reservation icons, and click

Delete

A confirmation box opens.

Click

Yes

to delete the selected recurring reservation.

The deleted reservation is removed from the recurrences list.

Summary of Contents for MGC Manager































































































































































































































































































































































































Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands

Polycom MGC Manager, User Manual

Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands