Plustek SmartOffice PS286 Plus User Manual Download Page 41

Page: 41 / 220

LEARING

APER

AMS

If a paper jam in the ADF happens, please perform the following steps:

1. Remove any unjammed documents still loaded into the ADF.

2. Open the ADF cover by pulling the cover open lever.

3. Gently but firmly pull the jammed documents out of the ADF. Try to avoid

creasing or wrinkling the documents.

Attention

Do not try to pull jammed or half-scanned
documents out of the ADF without first opening
the ADF cover. Doing so may permanently
damage the ADF.

4. Close the ADF cover by pushing it back down until it snaps back into place.

Summary of Contents for SmartOffice PS286 Plus




























































































































































































































Search results

Summary of Contents for SmartOffice PS286 Plus

Reviews:

Related manuals for SmartOffice PS286 Plus

Brands by name

Popular brands

Plustek SmartOffice PS286 Plus, User Manual

Search results

Summary of Contents for SmartOffice PS286 Plus

Reviews:

Related manuals for SmartOffice PS286 Plus

Brands by name

Popular brands