20
Attention
DO NOT load more than 50 sheets of paper
(70 g/m
2
, 18 lb.) to the ADF.
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be
skewed.
Although the documents should be loaded
firmly in place ensuring optimum scanning
accuracy, they should never be wedged in so
tightly that the process of feeding them
through the scanner is strained.
Do not load additional paper into the ADF
while the unit is feeding and scanning.
P
LACING
B
USINESS
C
ARDS
1. Load the business cards, headfirst and face down, toward the center of the
ADF and all the way into the ADF until touching the bottom.
For single-sided scans, load the business cards face down.
For double-sided scans, load the business cards in desired order.
2. Adjust the paper width slider to the business card width. The paper width slider
should be gently touching both sides of the business cards.
Attention
Don’t load more than 20 business cards in one
batch.
P
LACING
P
LASTIC
C
ARDS
The plastic card can be embossed credit card, driver license, ID card, insurance
card, medic-care card or any membership card. Make sure to load the embossed face
of the embossed card face up into the scanner.
If the scanned images are not good
enough, please remove the pad module before you load the plastic card.
1. Open the ADF cover by pulling the cover open lever.
Summary of Contents for SmartOffice PS286 Plus
