manualshive.com logo in svg

Pitney Bowes 2030, Manual, Page: 74 / 169

Share
Download
Pitney Bowes 2030 Manual Download Page 74

69 

 

 

 
10. Enter the time to begin the transmission, then press 

YES.  Or just press YES to begin the transmission. 

 

 
 
 
 
 
The document(s) is scanned 
into memory and automa-
tically sent at the time(s) 
specified (or immediately if no 
time was specified).  After  
pages are sent, the pages from 
the remote fax are automa-
tically received during the 
same telephone call. 
 

 

NOTES: 

 

1. If a Passcode is required by the remote fax, you must be sure that the 

Passcode of your machine matches that of the remote machine or you will 
not be able to receive from the other unit.  When Turnaround Polling, your 
machine uses the polling Passcode that is programmed in the SET-UP 
SYSTEM Feature. 

 
2. Turnaround Polling may or may not work with non-Pitney Bowes machines. 

 
5.3.5  Sending to a Mailbox with Programmable AutoDial Jobs 
 

A Mailbox is a storage space in the memory that only an authorized user can 
access.  If the proper Mailbox Security Access and procedures are followed, your 
Model 2030 can send documents to another compatible Pitney Bowes fax 
machine Mailbox.  For more information on setting up Mailboxes, refer to Section 
6.2, “Mailbox Functions” for all associated procedures. 
 
To send a document to a Mailbox using a Programmable AutoDial Job: 

 
Do This 

 
This Happens 
 

 
1. Insert the document face down in the Automatic 

Document Feeder and press FEATURES twice. 

 

 
 

 
2. Press YES. 
 

 
 
 
 

 
3. Press 5, then press YES 
 

 
 
 
 

 
4. Enter the Mailbox number and then press YES. 
 

 
 
 
 

AUTO DIAL? 

PRESS YES, NO OR

 

ts

 

1=SND, 2=RCV, 3=RELAY 
4=SND/RCV, 5=MAILBOX

 

 

ENTER MAILBOX #_ _ 

 

ENTER DESTINATION# 

 

z

 

JOB #016 TO MEMORY 
PAGE.1

 

 

Summary of Contents for 2030










































































































































































Reviews:

No comments