Pitney Bowes 2030, Manual, Page: 6 / 169

1
1. QUICK REFERENCE
A. GETTING STARTED
Your Model 2030 can be used as soon as it’s unboxed, plugged into a power
outlet, and connected to an analog telephone line. A Pitney Bowes Customer
Service Representative should have already done this for you, as well as set
basic system parameters (e.g., the time and date that appear in the display, etc.).
If your machine has already been installed, you can begin transmissions as soon
as you turn on the power. See Section 4 for instructions on “Basic Operation”
and Section 4.4 for “Sending a Document.”
If you need to move the system, or in the unlikely event that a Customer Service
Representative is unavailable, you can begin to use the system by following
these steps:
1. Plug the power cord into the wall outlet.
2. Insert paper in the Paper Cassette. See “Loading Paper,” Section 3.6.
3. Connection to telephone equipment:
(U.S. Version)
a. Connect the Telephone Line Cord that came with the machine. One
end goes into the RJ-11C telephone jack on the wall. The other end
goes into the back of the Model 2030 jack labeled LINE. (
See NOTE
1 below . There is no need to provide any other telephone.)
b. To install the Telephone Handset:
•
Plug one end of the coiled Telephone Handset Cord into the
Telephone Handset.
•
Plug the other end of the coiled Telephone Handset cord into the
jack on the Telephone Handset Base.
(U.K. Version)
a. Connect the Telephone Handset Cord to wall socket.
b. Plug Telephone Handset into rear socket marked TEL.
4. Install Imaging Cartridge. See Section 7.6, “Installing/Replacing the
Imaging Cartridge.”
5. Turn on the power and begin a transmission. See Section 4.4, “Sending
a Document.”
NOTES:
1. BEFORE PLUGGING THE MODEL 2030 INTO THE TELEPHONE LINE,
CHECK WITH YOUR PHONE COMPANY OR SUPPLIER TO BE SURE
THAT NO DAMAGE MAY RESULT TO THE PHONE SYSTEM. INFORM
THEM THAT YOU ARE INSTALLING A GROUP 3 FACSIMILE MACHINE.