manualshive.com logo in svg

Pitney Bowes 2030, Manual, Page: 39 / 169

Share
Download
Pitney Bowes 2030 Manual Download Page 39

 

34

 

 

Note:  If the line is busy or the remote machine is not 
available, the Model 2030 will automatically redial the 
destination.

 

If no connection is made after all redial 

attempts, the following message will appear briefly in 
the display:

 

 

 

 
 
 
 

Then, the following alterna-
ting messages will appear: 

 
 
 
 
 
 
 
 
 

Or 

 

 
 
 

 

4.4.4  Dialing with a Speed Dial Number 

 
A Speed Dial number is an abbreviated way of entering a phone number.  If you 
frequently send documents to the same location, you can store the number as a 
three-digit Speed Dial number, and simply enter the Speed Dial number from the 
Numeric Keypad.  Each number you store can be up to 36 digits including 
pauses.  A total of 200 Speed Dial numbers may be programmed.  See Section 
5.1 for procedures on “Storing Speed Dial Numbers.” 
 
To dial using a previously stored Speed Dial number through the Keypad: 

 

Do This 

 

This Happens 

 

 

1. Insert the document face down in the Automatic 

Document Feeder.

 

 

 
 
 
 

 

2. Enter the one, two or three-digit Speed Dial number 

from the Numeric Keypad.  
 
If a mistake is made, press NO to backspace and erase 
incorrect digits or use the cursor keys to move the 
cursor to the incorrect digit and simply enter the correct 
digit.   

 

 
 
 

 

 

JOB STATUS REPORT 

PRINTING NOW

 

 

ENTER 

DESTINATION(S)

 

 

 12

 

 

INCOMPLETE JOB 

CHECK JOBS REPORT

 

 

AUG 10  2001  10:00 

LINE BUSY

 

 

AUG 10  2001  10:00 

COMMUNICATION ERROR

 

 

Summary of Contents for 2030










































































































































































Reviews:

No comments