Pitney Bowes 2030 Manual Download Page 104

Page: 104 / 169

13. Press YES to select Retry Interval (or press

move to the next item). Press YES.

14. If desired, enter a new number (0-15). Press YES.

15. Press STOP to return to System Ready mode.

If you wish to print a System Set Up Report,
showing the revised settings, press the REPORTS
key. Press the down arrow key (

) until SYSTEM

SET UP REPORT appears in the display. Press YES.

5.7.7 Option Settings

The Option Settings are as follows:

•

Memory Size

– Displays the current memory capacity of the unit.

•

Access Control Code

– A four-digit Access Code can be used to

secure your 2030, that is, protect all or certain areas of machine
operation and/or programming.

•

OK Stamp

– The 2030’s OK Stamp allows you to choose printing of an

“OK” (red ink impression) stamp on the front trail edge of pages that have
been successfully scanned or transmitted.

•

Polling Passcode

– If a Polling Passcode is programmed, only

compatible Pitney Bowes fax machines with matching Polling Passcodes
will be able to poll your machine.

To view or adjust Option Settings, proceed as follows:

Do This

This Happens

1. Press FEATURES.

2. Press 8 and then YES.

3. Press YES.

4. The Model 2030 has been defaulted to SECURE

MACHINE SETTINGS. This feature can be turned off
by calling the Diagnostic Center. Enter your
ACCESS CODE, if required and press YES. The
default ACCESS CODE is 2030.

RETRY INTERVAL?

PRESS YES, NO OR

RETRY INTERVAL : 3min

ENTER NUMBER (0-15)

JAN 10 2001 10:00

SYSTEM READY

FEATURE SELECTIONS

PRESS YES, NO OR

SET UP SYSTEM ?

PRESS YES, NO OR

ENTER ACCESS CODE

_ _ _ _

MACHINE SETTINGS?

PRESS YES, NO OR

Summary of Contents for 2030










































































































































































Search results

Summary of Contents for 2030

Reviews:

Pitney Bowes 2030, Manual, Page: 104 / 169

Search results

Summary of Contents for 2030

Reviews: