manualshive.com logo in svg

Pitney Bowes 2030, Manual, Page: 42 / 169

Share
Download
Pitney Bowes 2030 Manual Download Page 42

 

37

To program a job using the DELAYED SEND key: 

 
Do This 

 
This Happens 
 

 
1. Insert the document face down in the Automatic    

Document Feeder. 

 
 
 
 

 
2. Press the DELAYED SEND key. 
 

 
 
 
 

 
3. Enter the destination(s) in one of the following 

ways: 

- 

a phone number from  the Numeric Keypad,  

- 

a previously stored Speed Dial number, 

- 

a previously programmed One-Touch key. 

 

If a mistake is made, press NO to backspace and 
erase incorrect digits or use the cursor keys to 
move the cursor to the incorrect digit and simply 
enter the correct digit. 

 

 
 

 
4. Press YES (press YES a second time if you entered 

a Speed Dial destination). 

 

 

 
5. Press YES to enter additional destinations or press 

NO to proceed. 

 

 

 
6. Enter the time to send the document by pressing the      

appropriate Numeric Keypad numbers, using the 24-     
hour time clock, and then press YES.   

 

 
 
 
 
The document(s) is scanned 
to memory and automatically 
sent at the designated time. 
 
 
 
 
Display returns to System 
Ready mode: 

 

 
 
 

 

4.4.8  Dialing by Programming an AutoDial Job 

 
A programmable AutoDial job is a transmission (or polling) instruction you enter 
from the Operator Control Panel.  Although this dialing method can be used for 
single facsimile transmissions, it is typically used for more complex jobs to 
transmit (or poll) a document to one or more locations at any specified time within 
a 24-hour period. 
 

ENTER 

DESTINATION(S)

 

ENTER DESTINATION# 

 

ANOTHER NUMBER? 

ENTER YES OR NO 

ENTER TIME 

_ _:_ _

 

 

ENTER TIME 

10:45

 

 

JOB # 001 TO MEMORY 
PAGE.1

 

 

AUG 10 2001  10:00 

SYSTEM READY

 

 

#01: MARKETING 

 

Summary of Contents for 2030










































































































































































Reviews:

No comments