manualshive.com logo in svg

Pitney Bowes 2030, Manual, Page: 34 / 169

Share
Download
Pitney Bowes 2030 Manual Download Page 34

 

29

4.  BASIC OPERATION

 

 
This Section describes the basic operating instructions of the system.  It also 
describes the procedures an occasional Model 2030 user needs to send, receive 
or poll documents. 
 

4.1  Turning on the Power

 

 
Once the Model 2030 has been set up, you should check the display on the 
Operator Control Panel to be sure SYSTEM READY is displayed.  If it is not, 
press the ON/OFF switch at the lower right rear of the system.  You should keep 
the power ON at all times. 
 
When the system is waiting to be used, you’ll see the current date and time in the 
display.  This is called the System Ready Mode. 
 

 

System Ready Mode 

  

 
 
Or, if your 2030 remains idle for 5 minutes* (factory setting), the display will read 
as follows: 
 
  
 
 
This indicates that the unit is conserving energy while not in use.  This 
programmable Power Saver feature greatly reduces electric bills.  If an incoming 
document arrives, the unit will reactivate the heater timer as it temporarily 
receives the document into memory.  Once the element has reached operating 
temperature, the document is completely printed.  
 
When you load a page in the Automatic Document Feeder, you’ll see an 
indication of the amount of memory that is available: 
 
 
 
 
  
 

 
*Note: The Power Saver Timer is user-selectable (1 to 255 minutes).  See 
Section 5.7.2 for instructions on adjusting this setting.

 

 

 

  

AUG 10 2001 10:00 

    SYSTEM READY

 

SLEEP MODE 

PRESS KEY TO WAKEUP

 

AUG 10 2001 10:00 

    MEMORY AVAILABLE 100%

 

Summary of Contents for 2030










































































































































































Reviews:

No comments