77
07
Function for Commercial Use
English
Function for Commercial Use 07
Other Functions
Pass through function
The DVD-V8000 is equipped with input connectors for com-
posite video and analog audio, and supports simple switch-
ing between the currently playing video/audio disc and video/
audio signals input from exterior sources.
This function is useful in venues such as museums or event
sites where it may be desirable to switch to an image or au-
dio source exterior to the disc currently being played. (See
page 83 for connection instructions.)
Control and display specifications
1) Operations with main unit buttons
Every time one of the three front-panel
PASS THROUGH
buttons (
MONITOR
,
VIDEO
,
AUDIO
) is pressed, switching
is performed between the DVD’s video (and/or audio) play-
back, and the exterior input image (and/or audio). The indica-
tor turns off during output of the internal disc video/audio
signal, and lights during output of exterior input image (and/
or audio) signals.
MONITOR:
When the button is pressed so that the indicator lights, video
signals input to the
VIDEO IN
connectors are output at
MONI-
TOR VIDEO OUT
.
VIDEO:
When the button is pressed so that the indicator lights, video
signals input to the
VIDEO IN
connectors are output at
VIDEO
OUT
.
AUDIO:
When the button is pressed so that the indicator lights, audio
signals input to the
AUDIO IN
connectors are output at
AU-
DIO OUT
after audio input level adjustment.
The through output function defaults to OFF when power is
first turned ON.
Exceptions
1
When no video signal is input to VIDEO IN
No switching between playback image and exterior input
image will occur even if the
PASS THROUGH MONITOR
or
VIDEO
button is pressed. In this case, the
MONITOR
or
VIDEO
indicator will flash.
2
When exterior image input signal is interrupted dur-
ing output
The
MONITOR
or
VIDEO
indicator will flash, and automatic
switching will not occur back to the playback image.
2) Switching control using Command Stack
Switching can be controlled by means of
Command Stack
.
3) Switching control using RS-232C
commands
Switching can be controlled by means of RS-232C interface
commands.
Also, the functions of the
PASS THROUGH
buttons can be
locked by means of the
KL
(Key Lock) command.
4) Automatic switching
When [
AUTO PASS THROUGH
] is set to [
ON
] on the
ADV.
SETUP
menu, switching is performed automatically to set
the selector to DVD when playback is started, and to external
input when playback is stopped. Note that if auto switching
is set to ON, the external input is selected when playback is
stopped, even if no signal is provided to the
VIDEO IN
con-
nector.
Important
¶
OSD for Monitor OUT is not displayed when outputting
an exterior input video signal.
¶
The through output function is enabled only for the com-
posite and monitor output connectors. Also, only analog
audio is supported.
¶
When displaying video from external input, the
SETUP
and
ADV. SETUP
menus cannot be displayed. In addition,
the player control panel (page 74) and video blackboard
(page 75) functions are also disabled.