3
Table of Contents
CAUTION
• To prevent injury and material damage, thoroughly read
this manual and all labels found on the equipment before
attempting to mount, install, move, or adjust the product.
• Do not install the unit outside or in the open air. Doing
so will lead to water seepage into the system, resulting
in fire or electric shock.
• Be especially careful when working around parts of the
system that have sharp edges.
• When performing installation work from a height, take
suitable precautions to guard against falling. Set up a
barrier around the work site to prevent accidentally
dropped objects from injuring persons standing or
walking below.
• Keep all foreign objects out of the unit. Do not tamper
with the unit, or fire or electric shock may result.
• Observe the following operating environmental
limitations:
Temperature: 0 °C to 40 °C
Humidity: 20 % to 80 %
• Install the unit only in properly ventilated areas.
5.4 Integrator Mode ....................................................... 134
5.4.1 About the Integrator Mode ............................. 134
5.4.2 Example of Integrator Mode Operation .......... 135
5.4.3 Adjustment and Setting in the Integrator Mode ... 136
1)
PICTURE Adjustment ............................... 136
2)
WHITE BALANCE Adjustment ................. 137
3)
COLOR DETAIL setting ............................ 138
4)
GAMMA Setting ....................................... 139
5)
SCREEN (Screen Position) Adjustment .... 140
6)
Brightness Enhancement (BRT. ENHANCE)
Setting at the Center of the Screen .......... 141
7)
SUB VOLUME Setting .............................. 142
8)
Program Timer Setting ............................. 144
9)
SCREEN MASK Setting ............................ 145
10) SIDE MASK Setting .................................. 146
11) VIDEO WALL Setting ............................... 147
12) BAUD RATE Setting ................................. 151
13) Assigning an ID ......................................... 152
14) Cooling Fan Control Setting ...................... 153
15) OSD Display Setting ................................. 154
16) FRONT INDICATOR Setting ..................... 156
17) COLOR MODE Setting ............................. 157
18) PRO USE Setting ...................................... 158
19) FRC Setting .............................................. 160
20) POWER ON MODE Setting ...................... 161
21) SEAMLESS SW Setting ............................ 162
22) MIRROR MODE Setting ........................... 163
23) MULTISCREEN Setting ............................. 165
5.4.4 PICTURE, White Balance and SCREEN Position
Adjustment Values Memory Area Tables ....... 167
5.5 RS-232C Adjustment ................................................ 172
5.5.1 About the RS-232C Adjustment ...................... 172
5.5.2 Interface .......................................................... 173
5.5.3 Combination Connection ................................. 174
5.5.4 ID Assignment ................................................ 175
5.5.5 List of RS-232C Commands ............................ 177
5.5.6 QUEST Commands ......................................... 180
5.6 Screen Burning ........................................................ 185
5.7 Precautions on Connecting Camera Images ......... 186
PRECAUTIONS
6.1 Precautions ............................................................... 187
MAINTENANCE .................................................................. 188
