136
5.4.3 Adjustment and Setting in the Integrator Mode
For details about button controls, refer to section 5.4.2, “Example of Integrator Mode Operation (pg. 135)”.
1) PICTURE Adjustment
The items that can be adjusted here are shown below, and are a little different than in PICTURE adjustment in the
menu mode (refer to the instruction manual).
• PC input
CONTRAST, BRIGHTNESS, H. ENHANCE, V. ENHANCE, etc.
• Video input
★
(Applicable only when a PDA-5003/PDA-5004 is mounted.)
CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, etc.
For details, refer to section 5.1.4, “List of Adjustable and Settable Items (pg. 101)”.
1
After switching to the input (INPUT1 to INPUT5) to be
adjusted, enter the integrator mode.
Select ‘PICTURE’.
2
Perform adjustment.
Note
When there is PC signal input at INPUT1, 2 and 5, it is not
possible to adjust the ‘COLOR’, ‘TINT’ or ‘SHARPNESS’.
When there is video input, it is not possible to adjust the
‘H. ENHANCE’ or ‘V. ENHANCE’.
It is possible to switch items by using the [
5
/
∞
] buttons
on the remote control or main-control panel.
Perform adjustment using the [
2
/
3
] buttons on the
remote control or main-control panel.
It is possible to move to another adjustment item using
the [
5
/
∞
] buttons.
The value adjusted here will become the center value for adjustment in the menu mode.
Pressing the [SET] button will return to screen
1
-
1
or screen
2
-
2
.
For details about the adjustable range, refer to section 5.1.4, “List of Adjustable and Settable Items (pg. 101)”.
I N T E G R AT O R
I N P U T 1
ENTER
S C R E E N
S E T U P
O P T I O N
P I C T U R E
SET
EXIT
MENU
: 2 . 0
: 1 2 8
: 0
: 0
: 1 2 8
C O N T R A S T
B R I G H T N E S S
H . E N H A N C E
V . E N H A N C E
G AMMA
P I C T U R E R E S E T
W H I T E B A L A N C E
C O L O R D E T A I L
Screen
1
-
1
For PC signal input
For video signal input
(Applicable only when a PDA-5003/PDA-5004 is mounted.)
I N T E G R AT O R
I N P U T 1
ENTER
S C R E E N
S E T U P
O P T I O N
C O N T R A S T
T I N T
S H A R P N E S S
P I C T U R E
0
:
0
:
0
:
2 3
:
:
0
:
SET
EXIT
MENU
B R I G H T N E S S
G AMMA
P I C T UR E R E S E T
WH I T E B A L A N C E
C O L O R D E T A I L
C O L O R
2 . 0
Integrator Mode
:
SET
SET
EXIT
MENU
0
B R I G H T N E S S
Screen
2
