76
Wall Mount Unit: PDK-WM01
8
With the lock bar in the lock position, fixing the lock
plate firmly in place with push rivet and the anchor
screw (M6 x 14 mm (9/16 inch)) (1 location: left and
right sides) removed in step 1 (1 location: left and right
sides).
•
If there are speakers installed on both sides
Fix it in place with the anchor screw (M6 x 14 mm (9/
16 inch)) removed in step 1 (*1).
•
If there is a speaker installed on the bottom and
if a
PDP-436SX
is installed
Fix it in place with the anchor screw (M6 x 14 mm (9/
16 inch)) removed in step 1 (*2).
Lock bar in the lock
position.
Anchor screw (*1)
Anchor screw (*2)
Unlocked
position
Locked
position
4.7.4 When removing the plasma display
Before beginning this procedure, turn off the
power to the plasma display and peripheral
devices and remove their power plugs from the
outlets. As necessary, also remove connecting
cables.
2
Removing the push rivet and the anchor screws that
are holding the lock plate, and the anchor screws
that are holding the PDP metal fitting (2 locations on
the left and right).
Anchor screw
Push rivet
Lock plate
Anchor screw
3
Unlocking the lock bar (2 locations on the left and right).
Lock
bar
Set the lock bar in its
unlocked position
Unlocked
position
Locked
position
Caution
1
Loosening the screw on the tilt adjustment metal
fitting.
Note
Removing the plasma display without removing the
tilt adjustment metal fitting may scratch the wall.
