7
Control-related
RS-232C terminal: D-sub, 9-pin (male)
(NOTE 1)
Combination In/Out Terminal: Mini-DIN, 6-pin
Power requirements
PDP-425CMX .......................... AC 100 V to 120 V, 50/60 Hz
PDP-42MXE10 ........................... AC 100 V to 240 V, 50/60 Hz
In-rush
............................................................... less than 30 A
Power factor
.................................................... more than 0.95
Consumption
PDP-425CMX ...................... 285 W
(NOTE 2)
(1.2 W in standby)
PDP-42MXE10 .................... 360 W
(NOTE 2)
(1.5 W in standby)
External dimensions (not including the handles and supplied stand)
........................... 1022 mm (W)
×
610 mm (H)
×
98 mm (D)
40-1/4 in. (W)
×
24 in. (H)
×
3-7/8 in. (D)
Weight (without attachment stand)
............ 30.5 kg (67 lbs.)
Dimensions of packaging
......................... 1177 mm (W)
×
767 mm (H)
×
354 mm (D)
??? in. (W)
×
??? in. (H)
×
??? in. (D)
Weight when packaged ...................................
38 kg (
???lbs.
)
Operating Temperature
.... 0 °C to 40 °C (32 °F to 104 °F)
(NOTE 3)
Operating Humidity
.......................................... 20 % to 80 %
Operating atmospheric pressure
.......... 760 hPa to 1100 hPa
Storage limitations
(when installed)
Temperature .................. –20 °C to +60 °C (–4 °F to 140 °F)
Humidity ......................................................... 20 % to 90 %
Atmospheric pressure ......................... 670 hPa to 1500 hPa
Storage limitations (when in original package)
Temperature ................ –30 °C to +60 °C (–22 °F to 140 °F)
Humidity ......................................................... 20 % to 90 %
Atmospheric pressure ......................... 670 hPa to 1500 hPa
Stacking ............................................ Fewer than three tiers
Standard accessories
<PDP-425CMX/PDP-42MXE10>
Power cord .............................................................................. 1
Ferrite core (for power cord) ................................................... 2
Ferrite core (for audio cables) ................................................. 3
Cable tie .................................................................................. 2
Remote control unit ................................................................ 1
AA battery ............................................................................... 2
Wiping cloth (for screen) ......................................................... 1
Speed clamp ........................................................................... 5
Operating instructions ............................................................. 1
Warranty (PDP-425CMX only) ................................................. 1
Remote control unit holder ..................................................... 1
Display stand ........................................................................... 2
Washer .................................................................................... 2
Hexagon socket head screw (M8 x 40) ..................................
2
<PDA-5003/PDP-5004>
★
(applies only when equipped with PDA-5003/PDA-5004)
Label for remote control unit .................................................. 1
Connector indicator label ........................................................ 1
Screws .................................................................................... 2
Operating Instructions ............................................................ 1
Warranty ................................................................................. 1
Specifications and external designs are subject to change without
notice.
Specifications
(NOTE 1)
The display is preset at the factory to 9600bps. This
setting can be changed using either the remote control
unit or a PC.
(NOTE 2)
Allow for 320 W = 320 VA of consumption per unit.
(NOTE 3)
The correct operating environmental temperature may
vary, depending on the installation site. (Refer to
Installation Site Requirements.)
