27
4) Arranging and securing cables with speed clamps and bead bands
Fasten cables using the supplied speed clamps.
Remember that speed clamps are not easily
removed, once fastened.
Installation Procedures
Organize cables together using the provided
speed clamps.
Insert
1
into an appropriate hole on the rear of the
unit, then snap
2
into the back of
1
to fix the
clamp.
Speed clamps are designed to be difficult to undo
once in place. Please attach carefully.
To attach the speed clamps to the main unit
Use the holes marked with the
&
sign as needed.
To remove speed clamps
Using pliers, twist the clamp 90° and pull it outward.
In some cases the clamp may have deteriorated over
time and may be damaged when removed.
* As viewed from the rear of the display.
1
2
Note
Cables can be routed to the right or left.
* As viewed from the rear of the display.
