87
En
10
The Initial Setup Menu
Navi Mark
• Default:
0 sec
In the Discnavi, each title is shown with a still frame
picture to remind you what it is. This setting lets you
decide the default still frame. The default setting of
0 second
takes the first frame of the title, but you can
also set it to
30 seconds
or
3 minutes
into the title
(if the title is shorter than the setting, then the first
frame is used).
Start Rec on DVD-R
• Default:
Manual (press twice)
On the default setting, when recording using a DVD-R
disc, you need to press the record button twice to
actually start recording. You can change this to
Auto
(press once)
if you prefer DVD-R recording to work in
the same way as recording to DVD-RW.
On the
Auto (press once)
setting, after pressing
¶
REC
the recorder takes a few seconds to prepare for
recording.
Chapter Interval
• Default:
3 min
When recording in Video mode, chapter markers are
put in every three minutes on the default setting. You
can change this interval to
5 minutes
or
10 minutes
,
or switch off automatic chapter marking altogether
with the
No Separation
setting.
Remote Control Set
• Default:
Recorder1
You only need to set this if you are using more than
one Pioneer DVD recorder in the same room.
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
There are three different recorder IDs. When set to
Recorder2
or
Recorder3
, the remote control mode is
shown in the front panel display.
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the
remote to the same ID.
To set the remote, press and hold
RETURN
and a
number button (
1
,
2
or
3
) until the
JOG MODE
indicator on the remote lights.
Summary of Contents for DVR-7000
Page 1: ...DVD Recorder DVR 7000 Operating Instructions 4 7 ...
Page 103: ......
