81
En
10
The Initial Setup Menu
Dual Mono Recording
• Default:
L
When recording a dual mono source from an external
input in Video mode or VR mode set to
MN32*
, you
can choose to record either the
L
(left), or the
R
(right) audio channel.
* This does not apply if recording from the DV input.
If you’re recording in VR mode (except when set to
MN32*
), both channels will be recorded and you can
switch them as you like on playback.
DV Input
• Default:
Stereo1
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel
DV IN/OUT
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the
other is for overdubbing after shooting.
On the
Stereo1
setting, the sound that was recorded
while shooting is used. On the
Stereo2
setting, the
overdubbed sound is used.
Audio Output settings
Digital Out
• Default setting:
On
If at any time you need to switch off the digital audio
output, set this to
Off
, otherwise leave it
On
. Note
that you can’t switch on/off the optical and coaxial
outputs individually.
Dolby Digital Out
• Default:
Dolby Digital
See page 29 for more on this setting.
Tuner Audio Level
• Default:
Standard
If the audio from the built-in TV tuner seems loud
compared to disc playback, set this to
Minimum
,
otherwise leave on the
Standard
setting.
Summary of Contents for DVR-7000
Page 1: ...DVD Recorder DVR 7000 Operating Instructions 4 7 ...
Page 103: ......
