Pioneer DVR-7000, Operating Instructions Manual

Page: 25 / 104

25
En
4 Getting Started
4 Choose ‘Auto Channel Setting’
from the sub-menu.
5 Choose ‘Antenna’ or ‘Cable’
depending on how you receive
your terrestrial TV channels.
The recorder starts tuning.
• If you want to cancel, press
ENTER .
You can fine-tune individual stations
using the
Manual CH Setting feature.
See page 25 for how to use this.
Setting up: Channel
skip and manual
tuning
The channel skip function lets you
skip channels where there is no
station so that as you change
channels using the
C/
– buttons or the front panel
SMART JOG , you only change to
channels that have a station.
The manual tuning function allows
you to manually tune to stations,
should you need to.
1 If the ‘Initial Setup’ menu is not
already displayed, press SETUP
and choose ‘Initial Setup’.
2Choose ‘Tuner’ from the Initial
Setup menu.
3 Choose ‘Manual CH Setting’
from the sub-menu.
4 Press ENTER to go to the
manual channel setting screen.
• Use the C/– button to
change channels.
• If you want to skip the displayed
channel (because there is no
station assigned to that channel),
change the
Skip setting to On .
• If you want to manually tune the
displayed channel, change the
Manual Tuning setting to On , then
move down to Level to manually
tune to a station.
5 To return to the Initial Setup
menu, press ENTER.
Î
ENTER
STANDBY
/ON
OPEN
/CLOSE
PLAYLIST
CHP
MARK
NAVI
MARK SETUP
ERASE DISCNAVI EDIT
PAUSE CM SKIP RETURN JOG MODE JOG MODE
REC PLAY STOP
PREV NEXT CHANNEL
PlusCode
REC REC
MODE MODE
SEARCH SEARCH
MODE MODE
INPUT INPUT
SELECT SELECT
TV INPUT SELECT INPUT SELECT DISPLAY
TV VOLUME AUDIO SUBTITLE
TV CHANNEL MENU TOP MENU
CM
4 ¢
8
3
S
0 9 8 7
6 5 4
3 2 1
SMART JOG