Pioneer DVR-7000 Operating Instructions Manual Download Page 17

Page: 17 / 104

Connecting Up

Cable box/
Satellite receiver

DVR-7000

Antenna/cable TV
wall outlet

VHF/UHF

OUT

VHF/UHF

OUT

VHF/UHF

A/V

AUDIO/VIDEO

OUTPUT

INPUT

2/AUTO REC

A/V

OUT

Connecting to a cable box or satellite
receiver (2)

If many or all the channels you receive by cable or satellite are
scrambled, we recommend using this setup.

Using the setup on this page you can:

• Record any channel by selecting it on the cable box/satellite
tuner.

• Record using the Auto Rec Start feature (

page 62

The setup on this page does not allow you to watch one channel and record
another.

Connect RF antenna cables
as shown.

This enables you to watch and
record TV channels.

2Connect the AUDIO

OUTPUT and VIDEO
OUTPUT jacks on this
recorder to an audio and
video input on your TV using
a set of A/V cables (as
supplied).

This enables you to watch discs.

Connect the audio/video
output of your cable box/
satellite tuner to the INPUT
2/AUTO REC jacks on this
recorder using a set of A/V
cables.

This enables you to record
scrambled TV channels.

The diagram shows standard
video connections, but you can
alternatively use the S-Video or
component video connections if
they’re available.

Do not connect this recorder
‘through’ your VCR, satellite
receiver or cable box. Always
connect each component directly
to your TV or AV receiver.

Summary of Contents for DVR-7000









































































































Search results

Summary of Contents for DVR-7000

Reviews:

Related manuals for DVR-7000

Brands by name

Popular brands

Pioneer DVR-7000, Operating Instructions Manual

Search results

Summary of Contents for DVR-7000

Reviews:

Related manuals for DVR-7000

Brands by name

Popular brands