Pioneer AVIC-S1 User Manual Download Page 81

Page: 81 / 124

User's manual AVIC-S1

Useful functions for navigation

- 79 -

Cancel block

Press the MENU key.
The D

ESTINATION

window opens.

In the D

ESTINATION

window, tap on the To the right button.

Tap once again on the To the right button.

Tap on the Unblock button.

The block is then cancelled and AVIC-S1 continues to drive

the originally calculated route.

6.4

Change route preferences

Overview

During navigation you can change the route preferences, perhaps

because you now no longer wish to use the motorway.

This is how you
change the route
preferences…

This function is only available during navigation.

Condition: The map is displayed in S

TANDARD

map view.

Press the MENU key.
The D

ESTINATION

window opens.

In the D

ESTINATION

window, tap on the S

ETTINGS

tab.

The S

ETTINGS

window opens.

Tap on the Route Preferences button.

Summary of Contents for AVIC-S1





























































































































Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands

Pioneer AVIC-S1, User Manual

Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands