Pioneer AVIC-S1 User Manual Download Page 38

Page: 38 / 124

User's manual AVIC-S1

- 36 -

Entering a destination

Tap on the category from which you wish to find a point of

interest.

The S

UBCATEGORY

window opens. The category that you have

just chosen is specified at the top.

Use the Up and Down buttons or the scrolling wheel to scroll
through the list of subcategories.

Tap on the subcategory in which you want to find a point of
interest.

If you do not wish to specify a subcategory, tap on All
categories (topmost entry).
The P

OINTS OF INTEREST NEARBY

window opens. The

subcategory that you have just chosen is displayed at the top.
It lists all the destinations of the specified category /
subcategory that can be found in a specific radius around
your current location.

Use the Up and Down buttons or the scrolling wheel to scroll
through the list of points of interest.

Tap on the point of interest you wish to drive to.

The route is calculated. When the calculation is concluded, the

map is shown.

Summary of Contents for AVIC-S1





























































































































Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands

Pioneer AVIC-S1, User Manual

Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands