Pioneer AVIC-S1, User Manual

Page: 101 / 124

User's manual AVIC-S1
Configuring AVIC-S1 - 99 -
8.7.4 Speed Limit
Speed Limit With this setting you establish whether or when any speed
restrictions should be shown on the map. Irrespective of whether
you are driving in a country with km/h or mph as a unit of
speed, the speed limit will always be shown in the unit you have
specified for the AVIC-S1. (Refer to "Distance", page)
The current setting is shown on the button. Tap on the button in
order to change the setting.
Setting Meaning
Always Speed restrictions will be shown.
Never Speed restrictions will not be shown.
On Speeding Speed restrictions will only be shown if you
drive too fast.
You can also set an acoustic warning sound for when you exceed
a speed limit. To do this, read chapter "Speed Limit Warning" on
page 102.
8.7.5 Current Speed
Current Speed With this setting you establish whether the map should show
your current speed as is calculated from the GPS positioning
data. The speed is shown in the unit you have specified for the
AVIC-S1. (refer to "Distance", page 111)
The current setting is shown on the button. Tap on the button in
order to change the setting.
Setting Meaning
Show Your current speed will be shown.
Hide Your current speed will not be shown.
8.7.6 Destination Info
Destination Info With this setting you can establish whether the distance left until
you reach the destination and, depending on setting, the
probable arrival time or the remaining driving time should be
shown. (Refer to "Displayed Time", page 100)
The current setting is shown on the button. Tap on the button in
order to change the setting.
Setting Meaning
Show The destination information will be shown.
Hide The destination information will not be
shown.