Pioneer AVIC-S1 User Manual Download Page 57

Page: 57 / 124

User's manual AVIC-S1

Navigation

- 55 -

4.5.3

Scrolling through the list of waypoints

You can view a maximum of 3 waypoints on the display. If the
list includes more waypoints, to the left alongside the list the two

buttons Up and Down will be activated, and you can use these
to scroll.

Tap on this button to view the 3 previous waypoints.

Down

Tap on this button to view the three following waypoints.
The end of the list may display just one or two waypoints.

4.5.4

Editing the list of waypoints

Overview

You can add additional waypoints to the list of waypoints at any

time; you can change the order of waypoints, delete waypoints or
view the specified waypoints on the map.

Opening the E

DIT

IST

AYPOINTS

menu

In the list of waypoints, tap on the waypoint that you wish to
edit.
The menu E

DIT

IST

AYPOINTS

opens to the right.

This menu offers the following buttons:

Summary of Contents for AVIC-S1





























































































































Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands

Pioneer AVIC-S1, User Manual

Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands