Pioneer AVIC-S1 User Manual Download Page 31

Page: 31 / 124

User's manual AVIC-S1

Navigation

- 29 -

The keyboard appears with the Street entry field.

Enter the destination street.

Note: The last 8 streets from the destination city that you
have entered as destination street are listed chronologically.
If you want to enter one of these cities, just tap on its entry.

As soon as the destination street appears in the list above the

keyboard, tap on it.
The keyboard appears with the House number entry field.

Enter the house number.
As soon as the house number appears in the list above the

keyboard, tap on it.
If you do not know the house number or do not want to

specify it, tap on the No house number button.

The route is calculated. Once the calculation has ended and
there is a sufficient GPS signal, the map will be displayed and

you can then commence your journey.

Summary of Contents for AVIC-S1





























































































































Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands

Pioneer AVIC-S1, User Manual

Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands