Pioneer AVIC-S1 User Manual Download Page 37

Page: 37 / 124

User's manual AVIC-S1

Navigation

- 35 -

4.3.4

Specifying points of interest

Points of Interest

Points of interest, also known as POI are included in the
navigation system's database. It concerns addresses or points on

the map that are categorised in accordance with specific criteria.
Included as points of interest are airports and harbours,
restaurants, hotels, petrol stations, public facilities, doctors,

hospitals, shopping centres and others.
Points of interest can be displayed using a symbol on the map.

Refer to Chapter "" on page for more information.
Points of interest can also be entered as navigation destinations.

Different processes are defined for specifying points of interest.
Choose

Point of interest nearby, if, for example, you are looking for
the next petrol station or a restaurant in the vicinity.

Point of interest in a specific city, if, for example, you are

looking for a specific theatre or a restaurant in a specific city.

Point of interest of supra-regional significance, if, for

example, you are looking for the next airport or railway
station.

Point of interest nearby

Note: Points of interest from the current surroundings can only
be specified if the GPS reception is sufficient for positioning.

Open the D

ESTINATION

window. (Refer to page 26)

In the D

ESTINATION

window, tap on the POI Search button.

Tap on the Nearby button.

The C

ATEGORY

window opens.

Use the Up and Down buttons or the scrolling wheel to scroll

through the list of categories.

Summary of Contents for AVIC-S1





























































































































Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands

Pioneer AVIC-S1, User Manual

Search results

Summary of Contents for AVIC-S1

Reviews:

Related manuals for AVIC-S1

Brands by name

Popular brands