Pinnacle Systems FXDEKO, User Manual

Page: 115 / 239

Creating Motions 115
FXDeko User’s Guide
Vertical
This specifies the vertical path of the motion from the object’s
starting position to its ending (home) position. If you do not
specify Y Position, the object(s) will not move vertically.
Ease
Refine the rate at which horizontal or vertical motion occurs, to
keep it constant throughout, or cause it to slow down or speed
up.
constant
Moves at a constant rate.
ease in
Starts slow and accelerates to full speed.
ease in fast
Starts slow and accelerates up to full speed, faster than
ease in .
ease out
Starts at full speed and decelerates.
ease out fast
Starts at full speed and decelerates, faster than ease out .
ease in and out
Accelerates, then decelerates.
ease out and in
Decelerates, then accelerates.
Size
This specifies the width or height of the object throughout the
selected motion. If you do not specify a size value, (OVR) might
appear next to the parameter to indicate that Deko is overriding
standard sizing to enhance the current DVE effect (this only
happens with some DVE effects).
Horizontal
This specifies width of the object throughout the selected
motion, in arbitrary units from 0.00 to 10.0 (full width).
Vertical
This specifies height of the object throughout the selected
motion, in arbitrary units from 0.00 to 10.0 (full scale).
Ease
Refine the rate at which horizontal or vertical growth occurs, to
keep it constant throughout, or cause it to slow down or speed
up.
constant
Grows at a constant rate.
ease in
Starts growing slowly and accelerates to full speed.
ease in fast
Starts growing slowing and accelerates up to full speed,
faster than
ease in .