Phytec phyCORE-i.MX35, Hardware Manual

Page: 61 / 115

The phyCORE-i.MX on the Development Board

PHYTEC Messtechnik GmbH 2010 L-734e_1
53
15.1 Concept of the phyCORE-i.MX Development Kits
Phytec decided to use one i.MX Carrier Board for different i.MX modules. Because every i.MX module
has different features and therefore a different pinning it is necessary to map the signals of the
modules to the right place on the Carrier Board.
For this every i.MX module comes with a phyMAPPER that is mapping the signals of the i.MX module
to the i.MX Carrier Board.
An example of the concept is shown in
Figure 11 below. For further information about the concept of
the i.MX Carrier Board refer to the i.MX Carrier Board Hardware Manual.
Figure 11: phyCORE-i.MX35 Carrier Board Connection Using the phyMAP-i.MX35