Phytec phyCORE-i.MX35, Hardware Manual

Page: 29 / 115

Jumpers

PHYTEC Messtechnik GmbH 2010 L-734e_1
21
3 Jumpers
For configuration purposes, the phyCORE-i.MX35 has 18 solder jumpers, some of which have been
installed prior to delivery.
Figure 5 illustrates the numbering of the solder jumper pads, while Figure 6
and Figure 7 indicate the location of the solder jumpers on the board. 13 solder jumpers are located
on the top side of the module (opposite side of connectors) and 5 solder jumpers are located on the
bottom side of the module (connector side).
Table 2 below provides a functional summary of the
solder jumpers, their default positions, and possible alternative positions and functions. A detailed
description of each solder jumper can be found in the applicable section listed in the table.
Figure 5: Typical Jumper Pad Numbering Scheme