Phytec phyCORE-i.MX35, Hardware Manual

Page: 54 / 115

phyCORE-i.MX35
46

PHYTEC Messtechnik GmbH 2010 L-734e_1
Table 14: JTAG Connector X2 Signal Assignment
*Note:
Row A is on the controller side of the module and row B is connector side of the module
PHYTEC offers a JTAG-Emulator adapter (order code JA-002) for connecting the
phyCORE-i.MX35 to a standard emulator. The JTAG-Emulator adapter extends the signals of the
module's JTAG connector to a standard ARM connector with 2.54 mm pin pitch. The JA-002
therefore functions as an adapter for connecting the module's non-ARM-compatible JTAG
connector U15 to standard Emulator connectors.
P
IN
R
OW
*
S
IGNAL
A B
S
IGNAL
VCC(VDD_3V3) 2 1 VTREF (VDD_3V3 via 100 Ohm)
GND 4 3 #X_CPU_TRST
GND 6 5 X_CPU_TDI
GND 8 7 X_CPU_TMS
GND 10 9 X_CPU_TCK
GND 12 11 X_CPU_RTCKRTCK (10k Ohm
pulldown)
GND 14 13 X_CPU_TDO
GND 16 15 #X_RESET_MCU
GND 18 17 #X_CPU_DE
GND 20 19 J_DBGACK (10k Ohm pulldown)