Phytec phyCORE-i.MX35, Hardware Manual

Page: 11 / 115

Introduction

PHYTEC Messtechnik GmbH 2010 L-734e_1
3
The phyCORE-I.MX35 offers the following features:

Subminiature Single Board Computer (85 x 58 mm) achieved through modern SMD technology

Populated with the Freescale i.MX35x microcontroller (MAPBGA 1568-01, 17x17mm, 0.8 Pitch
packaging)

Improved interference safety achieved through multi-layer PCB technology and dedicated ground
pins

Controller signals and ports extend to two 200-pin high-density (0.635 mm) Molex connectors
aligning two sides of the board, enabling it to be plugged like a "big chip" into target application

Max. 532 MHz core clock frequency

Boot from NOR or NAND Flash

32 MByte (up to 64MByte) Intel Strata NOR Flash

1 GByte (up to 32 GByte) on-board NAND Flash
1

128 MByte (up to 256 MByte) DDR2 SDRAM on-board

RS-232 transceiver supporting one UART at data rates of up to 460kbps

UART Interface without transceiver

32 KB I
2
C EEPROM

Separate I²C RTC with backup function

Integrated High-Speed USB OTG and Full-Speed USB Host PHYs

Integrated 10/100MBit Ethernet Controller, Ethernet-PHY onboard

Two integrated CAN Controllers

All controller required supplies generated on board by Power-Supply device

Synchronous 24Bit LCD-Interface

12-/16-bit CMOS Camera Interface

Support of standard 20 pin debug interface through JTAG connector

Keyboard support for up to 16 keys in a 4 * 4 matrix

Two I
2
C interfaces

SD/MMC card interface with DMA
1:
Please contact PHYTEC for more information about additional module configurations.