Pfaff 3586-2/02, Instruction Manual, Page: 97 / 156

13 - 1
Adjustment
13 Adjustment
On the PFAFF 3586-2/02 do not use a screw clamp on the needle bar! The
special coating of the needle bar could be damaged.
13
.01
Notes on adjusting
All adjustments in these adjustment instructions are based on a completely installed
machine and must only be carried out by appropriately trained specialists. Covers on the
machine which sometimes have to be removed and replaced for checks and adjustment
work are not mentioned here. The screws and nuts in brackets () are attachments of
machine parts which are to be loosened before making the adjustment and tightened again
after the adjustment has been carried out.
13
.02
Tools, gauges and other accessories
●
1 set of screwdrivers with blade widths from 2 to 10 mm
●
1 set of wrenches with jaw widths from 7 to 14 mm
●
1 set of Allan keys from 1.5 to 6 mm
●
1 metal ruler, part no. 08-880 218-00
●
1 adjustment gauge, part no. 95-752 474-05
●
1 adjustment gauge for zero point adjustment, 95-779 096-05
●
1 adjustment pin for zero point adjustment, 95 779 095-05
●
1 measuring instrument for the belt tension Part No. 99-137 380-91
●
1 adjustment gauge for tightening the hook drive belt, Part-No. 61-111 639-76
13
.03
Abbreviations
t.d.c. = top dead centre
b.d.c. = bottom dead centre