Pfaff 3586-2/02, Instruction Manual, Page: 124 / 156

13 - 28
Adjustment
13
.08.10
Adjusting the needle position
Requirement
The needle should be positioned at t.d.c.
●
Switch on the machine.
●
Select the ADJUST ZERO POINTS function on the graphics control panel.
●
Select the NEEDLE POSITION function.
0
5 4
3
Enter
●
By turning the balance wheel position the needle bar at it s top dead centre and press
Enter.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
TURN NEEDLE TO TOP
CONFIRM WITH ENTER KEY
13
.08.11
Correcting the start point
Requirement
1. On seams without start backtacks, the first stitch must be set securely in the
workpiece.
2. On seams with start backtacks, the backtack stitch must be set in the workpiece.
●
Switch on the machine.
●
Select the ADJUST ZERO POINTS function on the graphics control panel.
●
Select the CORRECTION VALUE START POINT function.
0 5 4
3
Enter
●
Enter correction value with the number keys in accordance with the requirement.
●
Press Enter .
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
CORRECTION VALUE START POINT :
1.0 mm
[ PERMISSIBLE 0.0 - 4.0 ]