Pfaff 3586-2/02, Instruction Manual, Page: 55 / 156

Input
11 - 15
5
1
2
3
4
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
1 - READ MACHINE DATA FROM DISK
2 - WRITE MACHINE DATA TO DISK
3 - READ CONF./ZERO POINTS FROM DISK
4 - WRITE CONF./ZERO POINTS TO DISK
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
1 - CARRY OUT COLD START
2 - DISPLAY SOFTWARE STATUS
3 - CONTRAST SETTING OF DISPLAY
4 - CHANGE CODE NUMBER
5 - INSTALL OPERATING SYSTEM
6
1
2
ADJUSTMENTS READ/WRITE
After this function has been called up, a menu is opened for entering or copying
machine data:
READ MACHINE DATA FROM DISK
With this function it is possible to read machine data (file name: MDAT)
which is saved on a disk, into the machine memory (e.g. after a cold start).
WRITE MACHINE DATA TO DISK
With this function the data for the machine setting (file name: MDAT) can be
written on to a disk.
There is a table of transferable machine data in the service manual for this
machine.
READ CONFIGURATION/ZERO POINTS FROM DISK
With this function it is possible to read the machine configuration and the
zero points (file name: KONF), which are saved on a disk, into the machine
memory (e.g. after a master reset).
WRITE CONFIGURATION/ZERO POINTS TO DISK
With this function it is possible to write the machine configuration and the
zero points (file name: KONF) on to a disk.
OTHER FUNCTIONS
This function opens a menu with various other functions:
CARRY OUT COLD START
With this function a cold start can be carried out.
During this procedure all settings, except the zero point settings and the
machine configuration, are returned to the initial load status; all programs in
the machine memory are deleted.
DISPLAY SOFTWARE STATUS
After this function has been selected, the part numbers of the machine
software and the software versions of various controllers are displayed.