Pfaff 3586-2/02, Instruction Manual, Page: 31 / 156

Preparation
9 - 4
50-008
Fig. 9 - 04
1
50-009
2
3
4
+
-
5 cm
9
.04
Changing the bobbin / adjusting the bobbin thread tension
●
Switch on the machine, see Chapter 8.03 Switching the machine on/off .
●
Select SEWING mode.
●
Select Threading aid function (number key 5).
The pressure bar moves out of the needle area, the sewing foot is lowered and the
sewing start is locked.
●
Open flap 1 .
●
Raise latch 2 and remove the bobbin case 3 together with the bobbin.
●
Insert the filled bobbin into the bobbin case 3 so that the bobbin turns in the direction of
the arrow when the thread is pulled out.
●
Through the slot pull the thread under the spring as shown in Fig. 9-04 .
●
Adjust the bobbin thread tension by turning screw 4 .
●
Raise latch 2 and insert the bobbin case 3 together with the bobbin in the hook.
●
Release latch 2 and press the bobbin case into the hook until you feel it lock into place.
●
Close flap 1 .
●
Press the Plus key .
The machine is ready for operation again.