Pfaff 3586-2/02, Instruction Manual, Page: 111 / 156

13 - 15
Adjustment
13
.07.05
Front point of reversal of the thread catcher
Requirement
When the thread catcher 5 is at its front point of reversal, the rear edge of the thread
catcher cutout must be positioned 1 mm before the bobbin case position finger 6 .
Fig. 13 - 14
6
5
1 mm
●
Swing roller level 1 into the lowest point of the control cam 2 .
●
Move thread catcher carrier 3 (screw 4 ) according to the requirement.
1
2
3
4