Pfaff 3586-2/02, Instruction Manual, Page: 24 / 156

8 - 1
Installation and commissioning
8 Installation and commissioning
The machine must only be installed and commissioned by qualified personnel!
All relevant safety regulations must be observed!
8
.01
Installation
The site where the machine is installed must be provided with power connections
(see Chapter 3, Specifications ).
It must be ensured that the standing surface of the machine site is firm and horizontal, and
that sufficient lighting is provided for.
For packing and transportation reasons the table top is in the lowered position.
The table height is adjusted as described below.
8
.01.01
Adjusting the table height
●
Loosen screws 1 and adjust table to required height.
●
Well tighten screws 1 again.
50-005
Fig. 8 - 01
1
1
1
1