Pfaff 3586-2/02, Instruction Manual, Page: 114 / 156

13 - 18
Adjustment
13
.08
Adjusting the feed mechanisms
13
.08.01
Aligning the fabric pressure bar
Requirement
1. The fabric should be held evenly along the entire length of the pressure bar 1 .
2. When the pressure bar 1 is in its basic position (right end position) there should be a
distance of 0.5 mm between the guide roller 5 and the pressure bar.
●
Align pressure bar 1 (screw 2 and nut 3 ) in accordance with requirement 1 .
To control the setting, place the fabric under the pressure bar and lower the
pressure bar. It must be possible to draw the fabric out evenly from below the
pressure bar along its entire length.
●
Adjust pressure bar 1 (screw 4 ) in accordance with requirement 2 .
Fig. 13 - 17
50-037
4
3
1
0,5 mm
2
5