Pfaff 3586-2/02, Instruction Manual, Page: 121 / 156

13 - 25
Adjustment
75-020
13
.08.07
Zero point of the material take-over unit
Requirement
The lowered needle strip 1 should be parallel to the pressure bar 2 at a distance of 3 mm .....
Fig. 13 - 23
●
Switch on the machine.
●
Select the ADJUST ZERO POINTS function on the graphics control panel.
●
Select the DEPTH function.
●
Move the needle strip 1 according to the requirement
(number keys 1 and 2) and take
over the setting with Enter .
●
Insert disk (KONF.) and save the new zero point setting, see Chapter 11.05 Functions in
the Input mode
under SERVICE, KONF./WRITE ZERO POINTS TO DISK.
0 5 4
2
Enter
3 mm
50-055a
2 1
3 mm
2
1