Pfaff 3586-2/02, Instruction Manual, Page: 145 / 156

14 - 18
Control unit
14
.03.02
Machine data table (MDAT)
The following input functions are stored:
Program selection: Program type
(0 = standard/ 1 – sequence programs)
Program number
Sequence program number
Index of active program (for sequences)
Index of next program (for sequences)
Array of program sequences
Type of change to next sequence
Seam parameter: Starttack
Stitch condensing seam start
End tack
Stitch condensing seam end
Angle seam end
Basting stitch
Bobbin thread functions: Bobbin thread preselect
Sewing head functions: Maximum speed
Speed tack / reduction
Speed basting stitch
Intermittent stop
Maximum depth correction
Array of depth correction
Counters: Suppressed stitches needle thread monitor
Reaction time needle thread monitor
Slow start stitches
Carriage start NIS
Start for thread trimming
Switch functions: Needle thread monitor
Bobbin thread monitor
Language selection
Lock/release functions
Move take-over
Threading position
Times: Air blast time
Service: Cutting speed
Code number