Pfaff 3586-2/02, Instruction Manual, Page: 33 / 156

Preparation
9 - 6
Enter
0 1
bis
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
100 100 50.5 5000
●
Using the Program number selection (number key 1) or Sequence number selection
(number key 2) function, select the required menu.
●
Using the number keys select a previously entered seam program.
●
Complete selection with Enter .
Seam programs can be transferred from a disk to the machine memory. To do
so the READ / WRITE PROGRAM function must be selected (see Chapter
11.05 Functions in INPUT mode ).
The CREATE/MODIFY PROGRAM function (see Chapter 11.05 Functions in
INPUT mode ) is used to create a seam program on the graphics control panel.
9
.07
Selecting a seam program
●
Switch on the machine and select INPUT mode.
Depending on the setting and configuration of the machine, in particular the
status bar may differ from the following example.