Pfaff 3586-2/02, Instruction Manual, Page: 28 / 156

Preparation
9 - 1
75-003
Fig. 9 - 01
1
2
9 Preparation
All regulations and instructions in this Instruction Manual are to be observed!
Special attention is to be paid to the safety regulations!
All preparation work is only to be carried out by appropriately trained personnel.
Before all preparation work, the machine is to be separated from the electricity
supply by removing the plug from the mains or switching off the On/Off
switch!
9
.01
Inserting the needle
Only use system 134 KK
needles!
●
Switch on the machine, see Chapter 8.03 Switching the machine on/off .
●
Select SEWING mode.
●
Select Threading aid function (number key 5).
The pressure bar moves out of the needle area, the sewing foot is lowered and the
sewing start is locked.
●
Loosen screw 1 and remove needle 2 .
●
Insert the new needle so that the long needle groove is facing forwards.
●
Tighten screw 1 .
●
Press the Plus key .
The machine is ready for operation again.