Pfaff 3586-2/02, Instruction Manual, Page: 46 / 156

11 - 6
Input
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
100 100 50.5 5000
1
AUT
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
1 - STARTTACK
2 - STITCH CONDENSING SEAM START
3 - ENDTACK
4 - STITCH CONDENSING SEAM END
4 - ANGLE SEAM END
5 - BASTING STITCH
1
2
3
11
.05
Functions in the INPUT mode
Initial state in the INPUT mode
Explanation of the functions:
Program number selection (number key 1)
This function is for the selection of the desired program number.
Sequence program number selection (number key 2)
With this function it is possible to select the sequence program number, the method of
moving the sequence forward and the sequence. When a sequence program number is
selected, the sequence saved under this number is displayed.
Create / modify current program
(number key 4)
With this function it is possible to create or modify the currently selected program using the
graphics control panel.
Create / modify program (number key 5)
Using the graphics control panel with this function seam programs can be created or
modified, the seam pattern and the corresponding program number are selected after the
function has been called up, see Chapter 11.06 Entering seam programs .....
Create / modify free program
(number key 6)
With this function free seam programs can be created or modified on the machine, see
Chapter 11.07 Create / modify free program
.....
Seam parameters (number key 7)
This function opens a menu for entering seam parameters:
STARTTACK
With this function the number of stitches for the start backtack can be entered.
STITCH CONDENSING SEAM START
With this function the stitch length and number of condensed stitches at the seam
start can be entered.
ENDTACK
With this function the number of stitches for the end backtack can be entered.