Pfaff 3586-2/02, Instruction Manual, Page: 38 / 156

10 - 3
Sewing
Explanation of the symbols in the pictogram bar:
Manual program start (number key 1)
The pictogram indicates that the program has been started manually.
If the Automatic program start function is selected, the machine switches over to this
function, see Chapter 10.02 Automatic program start.
Starting position (number key 4)
This is a direct function to bring the machine into its starting position.
Sewing foot up/down, threading aid (number key 5)
This is a direct function for raising or lowering the sewing foot. At the same time the
pressure bar is switched on or off and if necessary moved into the threading position.
Depth correction dependent on the material (number keys 6 – 0)
See Chapter 10.02 Automatic program start .
Loading table moved forward
10
.03
Manual Program Start
In the case of a manual program start, the program sequence is started by selecting the
Start Start Start Start Start function on the graphics control panel after the loading table has been moved forward.
Starting position of the machine
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
100 100 20.5 0
BOBBIN 0 / 10000
to
Explanation of the symbols changed in the pictogram bar:
Start (number key 1)
Direct function to start the program sequence.
Step-by-step forwards (number key 2)
With this function the seam pattern can be traced forwards step by step.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
100 100 20.5 5000
BOBBIN 2500 / 10000