PerkinElmer Photovac MicroFID, User Manual

Page: 80 / 170

MicroFID Software Manual
datalogger. You can see the duplicate events when you print
the contents of the datalogger.
5. Press the CAL key and select the calibration memory to be
used for this site. Press ENTER and then press EXIT.
6. Press SETUP and enter a 2 digit repair code for this
location. See SETUP Key on page 49 for a description of
Repair code. This step is optional.
7. When you return to the default display, the instrument
status will be “ Locate”. If t he event name is greater than 3
characters the bottom line of the display will scroll from
right to left.
8. Press ENTER. The instrument status will change to
“B kGnd”. P ress ENTER to create a placeholder and to
move to the next step.
9. The instrument status will now be “Sample ”. Pr ess ENTER
to create a placeholder and to move to the next step. The
instrument status will again be Locate. At this time, since
there are no other locations stored in the datalogger the
same event will be displayed.
10. Press EXIT at any time to return to the beginning of the
current event.
11. To store the next location, press the EVENT key. Select
“In sert” or “Sc an” to enter an event name.
12. Press the CAL key and select the Cal Memory to be used
for this site.
13. Press SETUP and enter a repair code for this location.
14. Press ENTER. The instrument status will change to
“B kGnd”. Press ENTER to create a placeholder and to
move to the next step.
78