PerkinElmer Photovac MicroFID, User Manual

Page: 44 / 170

MicroFID Software Manual
Status Code Priority Description
Cal C 4 This status will never be observed on the
display during normal operation as various
calibration prompt messages are displayed
while MicroFID is calibrating. If the
instrument is turned off during calibration,
Cal will appear on the display when
MicroFID is turned on again indicating the
last calibration was incomplete. “C al” status
is also shown on printed and graphed output.
Alarm A 5 Detected concentration exceeds the set
alarm level.
LoBatt L 6 Battery pack power is low. Connect
MicroFID to AC supply or replace the
battery pack.
Play P 7 The instrument is playing back previously
recorded data.
Endlog E 8 The datalogger is full.
Sniff S 9 High Sensitivity operation.
Ready R 10 Normal operation.
Locate L 11 Locate site. Used for Method 21 operation
BkGnd B 12 Record background reading. Used for
Method 21 operation
Sample S 13 Record sample reading. Used for Method 21
operation
Max M 14 Displays maximum detected concentration.
Table 1
Instrument Status ­ continued
To turn the instrument off:
1.
To turn the instrument off, press the front of the On/Off
switch. You will then be prompted to turn of the flow of
hydrogen.
42