PerkinElmer Photovac MicroFID, User Manual

Page: 56 / 170

MicroFID Software Manual
PRINT Key
MicroFID has been designed for use with a serial printer. The
printer must have a print width of at least 65 characters and a
proportionally spaced font. If you are using a parallel printer, you
will also need the serial to parallel converter (Part No. MX380145).
See Printer on page 87 for instructions on connecting and
configuring a printer for use with MicroFID. See Serial to Parallel
Converter on page 98 for instructions on connecting the serial to
parallel converter to MicroFID and to the printer.
When MicroFID is printing data it is still measuring real time
concentrations.
NOTE:
MicroFID is not classified for use in hazardous locations with a
printer
.
To print data:
1. Turn MicroFID off.
2. Use the MicroFID printer cable (Part No. MX396051) to
connect the MicroFID I/O connector to the printer.
3. Turn MicroFID on and press the PRINT key and then the
SETUP (*) key to select the desired setup options.
4. MicroFID will ask for the start and stop Events. Use the
ARROW keys to scroll through the list of events to select
the start event and then to select the stop event.
5. Enter an ID number if desired. Any number up to 16 digits
long may be entered as an ID number.
The ID number can be used, for example, to differentiate
between users or instruments. If more than one person is
54