PerkinElmer Photovac MicroFID, User Manual

Page: 43 / 170

Tutorial Session
Instrument Status Detected Concentration
Time
Date
Event Name
Figure 4
Default Display
The default display provides the following information: instrument
status, current detected concentration, Event name (if the datalogger
is on), time, and date. If an event name is longer than three
characters the bottom line of the display will scroll through the
information.
The instrument status appears at the left of the upper line of the
display and on the Print and Graph outputs. Each status has a
priority assigned to it. If more than one status is in effect, then the
status with the highest priority is displayed until the condition is
corrected or until the option is turned off.
When the bar graph is selected, the instrument status is reduced to a
one­letter code.
Status Code Priority Description
NoFlm N 1 Flame has not been ignited.
Check K 2 One of 4 faults is occurring. Press the
TUTOR key for details.
Over O 3 Detector electronics have been saturated.
Table 1
Instrument Status
41