PerkinElmer Photovac MicroFID, User Manual

Page: 51 / 170

Tutorial Session
5. Press the ARROW keys to play back the data. You can move
forward or backward through the datalogger.
6. Press EXIT at any time to return to normal operation.
If the flame is on, MicroFID is measuring and recording real time
concentrations when the instrument status is “P lay”. If, du ring
playback, an instrument status with a priority higher than that of
“P lay” is encountered in real time, it will be displayed. MicroFID
will however, continue to play back recorded data.
The PLAY function provides a speed search to review data or to
find the desired start and stop event names for printing or graphing.
SETUP Key
The setup key is used to enter analysis information. Press SETUP
and step through the options. Press ENTER to accept the displayed
data or enter a numerical value using the keypad and then press
ENTER. If no values are entered the display reverts to the default
display after 15 seconds.
To enter analysis information:
1. The first option is for the detector. If you have been using the
instrument with no flame and you now need to start the flame,
use this option. You can also use this option to start the flame
after a flame out fault. If you do not want to change the status
of the detector use the ARROW keys to select “No Change”.
Press ENTER to move to the next option.
2. The next option is Repair. Use Repair to record the state of
repair. You must define the repair codes and ensure all users
are aware of the codes. This option is most useful for Method
21 monitoring.
For example, a code of 0 may represent no repair under way, 1
may represent first attempt at repair with 5 days, 2 may
represent final repair attempt within 15 days, 3 may indicate
irreparable damage, and a 4 may represent a state in which a
repair can not be attempted until the next scheduled shut down.
49